Testing and Tagging

JIM'S TEST AND TAG

Free Testing and Tagging

ADX Brisbane has engaged Jim's Test and Tag to provide a free testing and tagging service on Wednesday from 12.00pm to 5.00pm.  Jim's Test and Tag will be on site during this time.  

If you would like to book a time direct on the Wednesday afternoon please call:

Phil Wuersching
Jim’s Test and Tag Enoggera
Electrical License Number 167134
T : 0406 429 872

BCEC Guidelines for Electrical Testing and Tagging

All portable electrical equipment, appliances and leads used on BCEC site must be tested & tagged in accordance with legislation and AS/NZS 3760:2010. - In Service Safety Inspection and testing of electrical equipment. 

Any electrical equipment found to be untagged must be tested & tagged or removed from BCEC site immediately. New equipment need not be inspected or tested but must be tagged with the re-test date prior to introduction to service as per AS/NZS 3760:2010. - In Service Safety Inspection and testing of electrical equipment.

Utilise safety switches (RCDs) when using electrical tools and equipment.

You Should Never:

• Use damaged electrical leads, tools or equipment
  
• Install or remove any type of power cable while the power is turned on
  
• Use electrical leads, tools and equipment in damp or wet conditions unless they are specially
  
• designed for use in those conditions.
  
• Place electrical leads in areas where they may be damaged (e.g. on vehicle access ways, over
  
• sharp edges etc).
  
• Overload electrical circuits
  
• Use modified tools or equipment